Language Selection

Get healthy now with MedBeds!
Click here to book your session

Protect your whole family with Orgo-Life® Quantum MedBed Energy Technology® devices.

Advertising by Adpathway

         

 Advertising by Adpathway

Electrospun Gum Arabic and Polylactic Acid Composite Boosts Ductility by Seventy-Eight Percent

3 hours ago 4

PROTECT YOUR DNA WITH QUANTUM TECHNOLOGY

Orgo-Life the new way to the future

  Advertising by Adpathway

Material scientists evaluating sustainable biopolymer formulations have determined that blending polylactic acid with gum Arabic through electrospinning substantially alters the mechanical and structural profile of the resulting composite nanofibers. By examining composite formulations incorporating gum Arabic concentrations spanning from two to fifty weight percent, the research team demonstrated that adding five weight percent of the natural polysaccharide increased tensile strain at break by approximately seventy-eight percent compared to unmodified polylactic acid. This considerable improvement in material ductility was accompanied by a concurrent forty-nine percent reduction in ultimate tensile strength at that specific filler concentration, reflecting an increase in molecular chain mobility and amorphous structural character. The investigation confirmed that the electrospinning technique successfully produced bead-free composite fibers across all tested ratios, establishing a reliable pathway for fabricating fibrous architectures with tailored physical characteristics. These findings demonstrate that introducing natural biopolysaccharides into thermoplastic matrices can significantly modify elongation capacity, mechanical resilience, and thermal endurance in bio-based materials.

Polylactic acid has emerged as an essential thermoplastic polymer derived from renewable agricultural resources such as starch-rich crops, sugar-rich plants, and various forms of biomass. Its production sequence encompasses extracting natural carbohydrates, fermenting sugars to obtain lactic acid, polymerizing the intermediate monomers, and processing the resulting macromolecular chains into functional formats. Because of its biodegradability, eco-friendly footprint, and significantly reduced carbon impact relative to conventional petroleum-derived plastics, polylactic acid has found widespread utility across packaging solutions, three-dimensional printing feedstocks, and biomedical applications. However, unmodified polylactic acid exhibits several intrinsic engineering constraints that hinder its operational suitability under demanding environments. The unmodified polymer suffers from pronounced mechanical brittleness, limited durability, low overall crystallinity, and uncontrolled biodegradation kinetics. Additionally, pure polylactic acid demonstrates inadequate resistance to moisture and gas permeation, minimal bioactivity that fails to encourage biological cell attachment, and a strongly hydrophobic surface profile, necessitating targeted structural enhancements through blending or natural filler reinforcement.

To overcome these performance bottlenecks, researchers turned to gum Arabic, a biocompatible natural polysaccharide harvested from Acacia tree species that possesses notable stabilizing, homogenizing, and film-forming attributes. In stark contrast to the hydrophobic and non-reactive backbone of polylactic acid, gum Arabic is naturally decorated with abundant hydroxyl and carboxyl chemical functionalities that impart strong hydrophilicity, bioactivity, and antioxidant capacity. When incorporated into the synthetic polyester matrix, these polar functional groups establish robust intermolecular hydrogen bonds with the ester groups of polylactic acid, significantly improving interfacial adhesion between the two distinct polymeric components. This strengthened phase interface facilitates effective mechanical stress transfer across the composite matrix, mitigating microscopic crack propagation while assisting internal microvoid filling. Furthermore, the migration of polar hydroxyl groups toward the outer fiber surface reduces the interfacial water contact angle, yielding a far more wettable substrate capable of interacting with enzymes, proteins, and cellular systems in potential biomedical scaffold settings.

The experimental preparation of the composite material was conducted at the Metallurgical and Materials Engineering Laboratory of the University of Lagos through three structured processing phases. Natural gum Arabic was sourced from Yakura Market in Kano, Nigeria, while corn starch-derived polylactic acid pellets having a weight-average molecular weight of 250,000 grams per mole and a density of 1.25 grams per cubic centimeter were procured from NatureWorks in Suzhou, China. The initial phase involved dissolving 73.30 grams of gum Arabic in 250 milliliters of distilled water, heating the mixture to approximately 60 degrees Celsius for forty-eight hours to promote complete dissolution, followed by a week of continuous observation confirming solution stability. Concurrently, four grams of hydrophobic polylactic acid were dissolved in twenty milliliters of dichloromethane using a magnetic stirrer for thirty to thirty-five minutes, maintaining an optimal polymer concentration of approximately 12.5 percent weight by volume prior to blending.

Formulating the electrospinning precursors involved combining the prepared solutions across specific gum Arabic weight fractions of two, five, ten, fifteen, twenty, thirty, forty, and fifty weight percent relative to polylactic acid. This concentration progression noticeably altered the physical rheology of the casting solutions, with increasing polysaccharide concentrations causing a noticeable rise in viscosity that systematically reduced required spinning durations from fifty minutes at two percent down to fifteen minutes at forty percent. For electrospinning execution, the polymer solutions were loaded into twenty-milliliter plastic syringes mounted within a fabricated apparatus operated at an ambient temperature of approximately twenty degrees Celsius. An electrical potential of twenty kilovolts was established between the spinneret needle and collector plate, calibrated between 250 and 255 volts during operation under constant applied syringe plunger pressure. The electrospinning run time was standardized at fifty minutes per sample, successfully producing three continuous, bead-free nanofibrous membrane specimens for each specified composition without microscopic defects.

Thermal evaluation through differential scanning calorimetry revealed that incorporating gum Arabic profoundly reshaped the crystallization kinetics and thermal stability of the electrospun composite matrix. The baseline thermogram of pure polylactic acid displayed an exothermic reaction window between 40 and 220 degrees Celsius, exhibiting a glass transition temperature of 41.75 degrees Celsius, a cold crystallization temperature of 101.06 degrees Celsius, and a melting temperature of 156.74 degrees Celsius. The absence of decomposition signatures in this range demonstrated that pure polylactic acid retains structural integrity up to its melting point. Upon blending with five and thirty weight percent gum Arabic, the thermal stability threshold of the composite expanded substantially from 220 degrees Celsius up to 300 degrees Celsius. Both filler concentrations produced remarkably similar thermographic profiles, indicating that the polysaccharide effectively restricts polylactic acid chain mobility and delays thermal degradation, while concurrently disrupting crystalline chain packing and reducing total crystalline order.

Mechanical evaluation demonstrated complex, non-linear tensile responses governed by the precise concentration of polysaccharide filler incorporated into the electrospun polyester network. Pure polylactic acid exhibited a baseline ultimate tensile strength of approximately 0.91 megapascals under standard tensile testing conditions. Initial loading with gum Arabic between two and five weight percent caused the ultimate tensile strength to drop by forty-nine to eighty-seven percent, reflecting interfacial disruption and reduced crystallinity. However, increasing the gum Arabic fraction to ten and thirty weight percent triggered a seventy-six percent rebound in tensile strength, establishing thirty weight percent as an optimal threshold where the polysaccharide functions as an effective reinforcing agent by bridging microscopic cracks and facilitating stress transfer. Beyond this thirty percent concentration, further filler additions caused a steady decline in tensile strength, as excessive gum Arabic acted as an inert filler that added mass without contributing to composite load-bearing capacity.

Tensile strain at break measurements revealed an inverse mechanical relationship when compared against ultimate tensile strength trends across the compositional spectrum. Nanofibrous specimens containing five weight percent gum Arabic attained the maximum elongation before failure, achieving a seventy-eight percent increase in ductility over unreinforced polylactic acid and reaching an absolute tensile strain value of 0.6025 millimeters per millimeter. This maximum mechanical flexibility directly matched the lowest recorded tensile strength in the test series, confirming that localized reductions in crystallinity promote macromolecular flexibility. The heightened volume of amorphous polymer domains permits greater conformational chain mobility, enabling the nanofibrous matrix to undergo substantial plastic deformation prior to rupture. As filler levels increased past five percent toward the thirty percent reinforcement threshold, ductility steadily contracted as composite stiffness reasserted itself, reiterating the reciprocal trade-off between elongation capacity and tensile strength across these functionalized biopolymeric materials.

Crystallographic characterization by X-ray diffraction corroborated the structural transformations observed during thermal and mechanical evaluations. The diffraction pattern of pure polylactic acid confirmed a semi-crystalline configuration marked by prominent reflection peaks at 15.38 degrees and 29.81 degrees two-theta, with the sharp peak at 15.38 degrees demonstrating the predominance of ordered crystalline domains. In contrast, incorporating gum Arabic slightly increased the sharpness of the primary Bragg reflection while diminishing its overall diffraction intensity by ninety-three percent. This dual behavior suggests that gum Arabic promotes localized ordering within specific crystal domains while simultaneously restricting long-range chain alignment, thereby expanding the amorphous volume fraction. A direct comparison between five and thirty weight percent composite diffractograms demonstrated that elevating gum Arabic content to thirty percent substantially restored crystalline peak definition, corroborating the superior stiffness, rigidity, and tensile strength observed at higher polysaccharide loadings.

Microstructural examination via scanning electron microscopy highlighted noticeable morphological shifts between unreinforced fibers and polysaccharide-modified composite membranes. Pure polylactic acid nanofibers displayed smooth, uniform surfaces with consistent cross-sectional diameters and completely bead-free geometries. Introducing five weight percent gum Arabic induced noticeable surface roughness and dimensional heterogeneity, yielding an average fiber diameter of 8.28 micrometers across one hundred measured fibers and an estimated porosity of 67.58 percent attributed to phase incompatibility. Conversely, the thirty weight percent formulation exhibited an average fiber diameter of 21.81 micrometers alongside improved diameter uniformity and a reduced porosity of 43.12 percent. These microstructural observations confirm that increasing gum Arabic concentrations reduces interstitial void volume while refining matrix cohesion. The resulting balance of enhanced ductility, broadened thermal resistance, and customizable surface morphology establishes electrospun polylactic acid and gum Arabic composites as adaptable candidates for sustainable packaging, drug release systems, and biomedical scaffold engineering.

Subject of Research: Mechanical, thermal, and microstructural characterization of electrospun polylactic acid and gum Arabic biocomposites

Article Title: Evaluation of the mechanical, thermal, and microstructural behaviour of gum Arabic reinforced polylactide (PLA) composite

Article References: Obasa, V. D., Olanrewaju, O. A., Owoyemi, I. O., & Adeosun, S. O. (2025). Evaluation of the mechanical, thermal, and microstructural behaviour of gum Arabic reinforced polylactide (PLA) composite. Journal of Materials Science: Composites, 6(1), Article 14. https://doi.org/10.1186/s42252-025-00079-5

Image Credits: AI Generated

DOI: 10.1186/s42252-025-00079-5

Keywords: Polylactic Acid, Gum Arabic, Electrospinning, Nanofibers, Biocomposites, Tensile Strength, Ductility, Differential Scanning Calorimetry, Thermal Stability, X-ray Diffraction, Scanning Electron Microscopy, Porosity, Crystallinity, Biopolymers, Polymer Blends, Biomedical Materials, Sustainable Packaging

Read Entire Article

         

        

Start the new Vibrations with a Medbed Franchise today!  

Protect your whole family with Quantum Orgo-Life® devices

  Advertising by Adpathway